Wednesday, July 19, 2006

How To Make a Secret Hollow Soda Can:

For this you will need:

  • Coke cans/soft drink cans/beer cans whatever you can find or want to use (these cans must be unopened)

  • Sharp scalpel or knife

  • Can opener

  • 1 bag of plaster of paris

  • 1 small glass jar with metal screw on lid (small spring valley bottles or those small jam bottles are good)

  • cup or jug

  • glue gun or strong super glue


Ok, now you have your materials, grab your unopened drink can and sharp knife/anything pointy and sharp.
Then on the bottom of the can make a small hole to drain the liquid out of the can (pic 1) into a cup or jug, this can be messy so start off with a small hole and slowly make it bigger. Once the can is empty we get to the tricky bit, I have ended up having to restart after this step.



Now to remove the top of the can. It’s actually not that hard once you know what you doing. Grab the can opener and grip it on the top of the can, making sure that the can opener is cutting the can part and not the top ’lid’ part. Some can openers won't allow you to cut like mine, but most will be able to do it properly.



Once you have cut this lid off, clean it up and wash the can out thoroughly. The lid may contain a few little dags of metal so remove those if necessary. Now, you should be left with an empty can and a lid that fits on the top flush.


Now, take the glass jar and remove the screwtop lid. Take the top of the can and glue the jar lid to the bottom. Wait until it dries and screw it on the jar to test to see if it strong enough.



Now to fill the can with the plaster. Mix it up in a bowl and you will only need enough to fill the can about half way. Then use a small bit of silicone or glue and patch up the hole we made in the bottom of the can, you don’t want any plaster leaking.


Take the top of the can with the lid glued to it and we screw it onto the jar. we then start to pour our plaster into the can filling it to about halfway. Once at half way, we take the jar and lid and place it in the can. This is to get the jar at the right height so it closes and looks like a normal can. If there is not enough plaster in the can, fill to the desired height and leave the lid on the can until the plaster has dried. We want the plaster to create a base for the jar but also hold it firmly inside the can. The plaster should cover at least half of the jar.



After few hours, check to see if the plaster has dried. If it has, slowly unscrew the lid off the top of the can to test to see if the jar has held. Test screwing the lid on and off a few times just to see if everything is held and that is pretty much it.


You can modify the can and make it a bit more stealthy, and that is to add a water (or any other type of liquid) pack to the bottom of the can and plaster over it. This creates a liquid sound inside the can when it is shaken, so it even sounds real.


Article by RemadE.

87 comments:

Anonymous said...

Well now we know how to hide our drugs and distribute them, i mean our "candy", oh hell you know what i mean. ive seen one of these when he cops brought it in our school to teach antidrugs crapola. nothing new but i still wanted to know how to make one of those. Cool tutorial thanks how to make stuff!

Anonymous said...

Perfect to go alone with the carved out book. I'm not too sure about the liquid pack, but it might work.

Calvin said...

Pretty neat, although I don't have any plaster of paris at my place. Pretty good guide, I just wish you would update more often :/

Anonymous said...

would be good if i had somthing to hide...

Anonymous said...

wicked cool trick'my son would love this one,still in afgan;fighting to come home,,,,,,,,,,,,,soon 'I hope''''''''''mom

Anonymous said...

haha, watch out, I got sprayed in the face with beer puncturing the hole in the bottom

Anonymous said...

any suggestions for getting the top off?, i keep punctioning through the top partthat sticks out and looks bad wen i ifinish

Anonymous said...

Heya, the hole in the bottom leaves an obvious trail that an 'empty can' is created. Although for the most part this doesn't matter as closer inspection of the can would possibly reveal that the can's been tampered with. But what about making the hole right under the rim, where you're going to can-open the can anyway? Or would it not be possible to just can-open the can straight from the beginning and pour the liquid out? Just a couple of thoughts. Nice tutorial!

Anonymous said...

The point of having the small hole in the bottom and not opening the can is so it blends in with other cans of soda. That is what make the can so stealthy. You put the can with other cans in the fridge, a cooler, the pantry. It will be overlooked, you know if someone was looking. Jeez you missed the whole reason you'd even make the can. Thanks for the slick idea, and like the others said, POST MORE often because this site is pretty damn cool.

Anonymous said...

thats so stupid where the hell am i going to get a soda can?

Anonymous said...

if only i had a reason to do this.
couldnt you just remove the top with the can opener then pour it out?

I will make this, with the cut out book. but i dont know if they will ever see purpose other than cool stealthness

Anonymous said...

This worked really well for me: I used an exacto knife to cut through the top without draining the can. This kept it under pressure so the can didn't dent while I pressed down on it. Also, it's easier to see when you cut through a portion of the can because the liquid inside will start fizzing out.

Anonymous said...

WTF happened to this site?

Anonymous said...

i made a can out of 55 gallon drum and people thought we had regular oil in it. so cool to stash really small filipinos or kids in them. pretty soon we are going to make stash cans out of shoe boxes!!! thansk for the great info!

Anonymous said...

i agree with the guy 2 comments ago

Anonymous said...

ya that guy 3 comments ago has the right idea. now how do you line up the little jar lid prefectly on the can 'lid', and the postioning of the jar in the can. i guess its common sense but its hella hard.

Anonymous said...

nice home made can, but for 10$ or less u can just go buy one..


also wtf is up with the last post, i get the credit card one, u hide CC's in the can, blah, come on u know anyone that has one of the cans is gonna be hiding pills in it or pot or whatever. ;)

Zach said...

This site is i violation of our Terms of Service. You must cease and desist providng this information before we are required to inform the authorities about this content.

Blogger Staff

Anonymous said...

Nice tek, but no need for that hole in the bottom. It could be done nicely by cutting of the top and then pouring out the liquid!

Anonymous said...

""ya that guy 3 comments ago has the right idea. now how do you line up the little jar lid prefectly on the can 'lid', and the postioning of the jar in the can. i guess its common sense but its hella hard. """"

u could just put the lid on the jar after the plaster step is done and then glue the pop can top on so you know right where it will go

Anonymous said...

it's pretty cool and I have everything I got , except for a water pack which makes the right sound when shaking and which has to be small enough to fit in the can, can someone help me here , please , thank you

Anonymous said...

Does anybody know a really good tool to open the can lid, i've tried 3 different can-openers and different types of cutters and knifes but every time it turns out shit. someone's probably going to answer that maybe I have no skill I really do try my best. Please could someone help me on this one?

Anonymous said...

a good trick for the hole in the bottom on the can is to use the sharp point on the edge of some hand sharpeners to make a really small hole on the inside rim on the bottom of your can.

Anonymous said...

lol your violating terms of service maybe thats why he hasent been posting

Anonymous said...

put some water and air in a small ziplock bag... not the smallest teensy one, but maybe half the size of ziplock sandwich bag. Then just push it down into a thin layer of plaster before pouring more plaster in.

Anonymous said...

Many of you might not be aware that your fitness level has much to do in case you are going through erectile dysfunction. Your over all health and your fitness level has much to do with the workings of your sexual organ. So keep an eye on your health and fitness to keep ED at bay.

Anonymous said...

what happened to this site. there hasnt been anything new on it for like a year.

Anonymous said...

getting the top of the can is hell

Sinu S Kumar said...

Nice Post

just surfed in thought i'd say hi, interesting blog you've got here. do keep up the good work.


warm regards from a Travel Blogger from India


Sinu Kumar

The Kerala Articles

Anonymous said...

nice. i made one for me and one for my friend. once you get the top off its easy. you can get a bunch of plaster of paris for $2.50 at walmart.

Anonymous said...

try to make one about how to build a RAFT...that would be cooooool....lol

Anonymous said...

you guys need Jesus!
if u havent come to him just ask for forgivness and for him too come into your life. i know it sounds simple but thats all it takes to be with him when your time comes to go. that, and to continue letting him live through you and fufiling you purpose. God doesnt want us to hate each other, he loved us enough to send his only son to die. Jesus lived a perfect life. when we sin were separated from God cause he is holy. when we are forgiven, he doesnt see us and all the bad things weve done, he sees Jesus and his perfect life.
When i die ill finaly be home with my family and Jesus
PLEASE IN THE NAME OF JESUS, IF YOU ARENT A BELIVER OR WANT TO BECOME ONE BUT DONT KNOW HOW,OR YOU JUST WANT TO KNOW MORE, email me at jacobilonghorn@hotmail.com

Unknown said...

Dude, I'm a Christian too, and as much as I'd like the lost to be saved, you can't do it like that. Don't spam forums like that, that'll just make them hate Christians. But yeah, I totally drenched myself with dr. pepper when doing this.

free auto insurance rates said...

FreeAutoRater.com We provide free auto insurance rate quotes online, save money quickly and easily by comparing multiple free auto insurance rates in minutes. Get free auto insurance quotes now. auto insurance quote.

New York Mortgage Home Loan said...

Your blog is very much good. I am very much impressed by your blog content.

Karlan said...

Adding plaster/stone "slurry"
or sodium chloride (salt) will
help the plaster set in under 20 minutes; little dental technician trick

Sergio Negrinnie said...

hello great post and great idea about How To Make a Secret Hollow Soda Can, but where I can find Generic Viagra and bag of plaster of Paris

Cialis Online said...

hello
Excellent article! It’s just what i needed to understand. Have a nice day!!

Anonymous said...

will it work if insted of using plaster you simply fill most of the can with water. i feel like it would make it sound more real even if the jar isnt held down as well??

Anonymous said...

Well why would you need a hole in the first step if you're just going to cut the top off with a can opener. This also makes your later step about putting liquid in it completely pointless. This is a good idea, nonetheless, and I've already made one. Thanks.

viagra online said...

I recently came across your blog and have been reading along. I thought I would leave my first comment. I dont know what to say except that I have enjoyed reading. Nice blog. I will keep visiting this blog very often.

inversiones financieras said...

Blog is so good where i get lots of information nice job!!

Arizona foreclosures said...

a good trick for the hole in the bottom on the can is to use the sharp point on the edge of some hand sharpeners to make a really small hole on the inside rim on the bottom of your can. Personal Injury Attorney Houston

Anonymous said...

where is the lock ?? can you make a lock on the bottom of can or the top??? where is the lock!!!!!!!!!!!

Anonymous said...

what about the lock?? does it have a lock???

Anonymous said...

I like very much your way of presentation openers.........!!
Opensesameusa.com provides multi-beverage bottle opener, beer bottle opener, wine openers
and assisting devices for senior people who have symptoms of arthritis.
Arthritis Pain Relief

Anonymous said...

nice idea but what if some one takes your ''secret stash'' can instead of one that has the drink in it, ever thought about that?

Anonymous said...

Just buy 1 at www.stupid.com/secret-can-safe.html
only about $9 and they are frickin awesome for hidin sht. good luck tryin ths :P

Viagra said...

Thank you for sharing these instructions!

honolulu discount hotels said...

Fabulous! This should keep me busy for a while! I would like to thank you for sharing your thoughts with us.

Anonymous said...

Slick I wondered how they make these.

http://carallumafimbriata1.wetpaint.com

Anonymous said...

Lets try again shall we?

Caralluma

Unknown said...

Wonderful post.Thanx for sharing.
Download Spider man 3 Game | Download Ea sports cricket 2011| Download free Full version Games.

Anonymous said...

You turn can upside down so carbonation will not try to come out through bottom dumb ass

Anonymous said...

Yolo

Stacey said...

Thanks regarding the post. It's good to listen to one other individual's opinion. I certainly agree with exactly what you are saying regarding the data. Please keep up the nice work as I'm definitely going again to read more.

Anonymous said...

You can slowly cut the rim off and take the top off and pout the liquid out with having to puncture the bottom at all.

Miranda B. said...

Nice but to all the people that are saying you can just buy one for $9. i made 4 of them and made $40 off them so yea.... its better and cheaper to make them... also i drunk the soda first and when i glued the jar lid i just pushed the little tab thing back up to cover the mouth hole

Anonymous said...

i finger myself.

Anonymous said...

Im going to sell meth and coke in this can. thanks for the tutorial! mabet even some bank money

tabaco123 said...

This information is very interesting, I really enjoyed, I would like get more information about this, because is very beautiful, thanks for sharing! Engineers auto insurance discount

Unknown said...

Such a great post which tell so many truth behind it. Life insurance comparison quotes

loan modifications california said...

Actually i was looking for this type of information over the internet and finally got here. Thanks for giving these helpful tips..

loan modifications california

Mark said...

Made one from an empty soda can. Just had to reset the open tab before gluing the lid of the bottle to it. Used a plastic bottle with a metal lid with a seal inside, and the white expanding "Gorilla Glue" which worked better than regular "Gorilla Glue". Next time I will try with a can opener and just pour out the contents. One thought, perhaps if you do puncture the bottom of the can to empty it, tap down the puncture from the inside back to flush and then silicon from the inside. You can trim the bottom later. As for the comment about putting the bottle in first and then adding the lid, by gluing the lid to the cover first as close to center as you can, and then when dry screwing the cover back on the bottle and then inserting the bottle into the plaster you ensure the original can top lines up with the can and you achieve the maximum depth into the can. Make sure you put a weight on the top while drying to ensure the bottle doesn't "float" up. This will also make sure your can/cover cut line is tight.

Anonymous said...

I'm gonna make money from this. Thanks internet!

Anonymous said...

Hmm I wanna try this. I was thinking of slightly opening the top, just enough to let the carbination out then using the can opener. Also to get the jar cap and jar to stay I think im gonna use that jb weld stuff. Good tutorial!

Unknown said...
This comment has been removed by the author.
Unknown said...
This comment has been removed by the author.
Unknown said...

Great information! The information contained in this web really very nice
Thank you for willing to share information with us.
continue to provide us the latest information other
Cara Menyembuhkan Penyakit Pneumonia Obat Herbal Sakit Maag Obat Sciatica Cara Meredakan Gejala Menopause Obat Amblyopia

Unknown said...

HOW I GOT MY LOAN FROM DR PURVA PIUS LOAN FINANCE (urgentloan22@gmail.com)

Hello Everybody,
My name is Mrs Sharon Sim. I live in Singapore and i am a happy woman today? and i told my self that any lender that rescue my family from our poor situation, i will refer any person that is looking for loan to him, he gave me happiness to me and my family, i was in need of a loan of S$250,000.00 to start my life all over as i am a single mother with 3 kids I met this honest and GOD fearing man loan lender that help me with a loan of S$250,000.00 SG. Dollar, he is a GOD fearing man, if you are in need of loan and you will pay back the loan please contact him tell him that is Mrs Sharon, that refer you to him. contact Dr Purva Pius,via email:(urgentloan22@gmail.com) Thank you.

LOAN APPLICATION FORM:
=================
Full Name:................
Loan Amount Needed:.
Purpose of loan:.......
Loan Duration:..
Gender:.............
Marital status:....
Location:..........
Home Address:..
City:............
Country:......
Phone:..........
Mobile / Cell:....
Occupation:......
Monthly Income:....

Contact Us At :urgentloan22@gmail.com

AgaricPro3 said...

Beauty of Sharing Solutions, About Your Health Issues ...
Obat Yang Tepat Mengatasi Asam Urat
Cara Ampuh Mengatasi Asam Urat
Cara Mengatasi Penyakit Asma Pada Anak
Obat Herbal Vertigo Paling Aman
Obat Herbal Darah Beku
Obat Herbal Teratozoospermia
Cara Mengatasi Teratozoospermia
Obat Hernia dan Celana Hernia Pada Anak Telah Terbukti Ampuh
Obat Polip Hidung Tanpa Efek Samping
Obat Darah Tinggi Telah Terbukti Ampuh

Unknown said...

THANKS FOR SHARING GREAT POST ADMIN NICE MEET YOU ADMIN
Destroy Windows 10 Spying Keygen

Anonymous said...

Are you tired of seeking loans and mortgages from banks? Have you been turned down constantly by your banks and other financial institutions due to bad credit? Are you about loosing your home due to financial constraints? Global Lenders Inc is here to set you free from debt. For immediate enquirers you can contact us via: powerfinance7@gmail.com

BORROWERS APPLICATION DETAILS
1. Your Full names:_______
2. Contact address:_______
3. Country Of Residence:______
4. Loan Amount Required:________
5. Duration:_____
6. Gender:_____
7. Occupation:________
8. Monthly Income:_______
9. Date Of Birth:________
10.Telephone Number:__________

Email Kindly Contact Him Via: powerfinance7@gmail.com

Anonymous said...

I used sheet metal cutters and cut the top rim just deep enough then u can use scissors to bring it down further. Use another can for the unopened lid, just roughly cut it off with about an half an inch of tin on it then cut a tear almost to the lid and start peeling it. Should leave a perfect lid. Had the same issue as u

Unknown said...

BENEFITS OF CONSUMING DRY FRUITS

Unknown said...

I love learning simple DIY skills and this article has provided important instructions of making a secret hollow can and I will be making my can this coming weekend. I am glad that o visited this site and found a great post and I will not mind revisiting it occasionally to follow up on new DIY skills. for more interesting blog articles, hire our content and article writers by clicking on Custom Literature Analysis Services.

generic viagra 100mg said...

nice information. It feels really great to read such kind of wonderful piece of writing.

cara mendeteksi kanker payudara said...

Thank you for sharing this article. Awaited updatean next gan
Cara Mendeteksi Kanker Payudara
Obat Alami Kanker Payudara Stadium 2
Ciri-ciri Kanker Payudara Stadium 1
Penyebab Kanker Payudara Yang Harus Diwaspadai
Waspada Gejala dan Ciri Kanker Payudara
Pantangan dan Anjuran Makanan Penyakit Kanker Payudara

Risma Herbal said...

informasi yang sangat berguna sekali gan buat saya

penyakit asma said...

Thanks for information gan

Risma Herbal said...

Thanks for sharing this article. Verry nice:)

Asma

Risma herbal said...

Terimakasih infonya:)

https://goo.gl/mVyrAa
https://goo.gl/XHT7Mm
http://herballestari.com/

Albendazol 400 mg kaufen said...

That's an amazing receipt. Thanks for sharing it with us. I definitely try it today.

Gerard said...

Nice post! Thanks for sharing this information. Looking for help with your selecting your thesis topic? Get reliable research topics help from the leading Research Projects Writing Company at an affordable cost. Our experts are available 24/7.

raza shah said...

Really i appreciate the effort you made to share the knowledge.Panama Claim Adjusters The topic here i found was really effective to the topic which i was researching for a long time

Rebecca Michaelson said...

HELLO, I am Rebecca Michaelson by name living in Europe. Here is a good news for those interested. There is away you can earn money without stress contact (THOMAS FREDDIE) for a blank [ATM CARD] today and be among the lucky once who are benefiting from this cards. This PROGRAMMED blank ATM card is capable of hacking into any ATM machine anywhere in the world. I got my master card from a good Hacker on the internet, with this ATM Card I am able to collect $5000 dollars every day via contacts:
+1 (985)-465-8370 {thomasunlimitedhackers@gmail.com}
I was very poor but this card have made me rich and happy, If you want to get this opportunity to become rich and establish your business then apply for this Master card, I am so happy about this because i got mine last week and I have used it to get $240,000.00 dollars from THOMAS FREDDIE UNLIMITED Hackers is giving out the card just to help the poor and needy and they ALSO OFFER FINANCIAL ASSISTANCE. get yours from THOMAS FREDDIE UNLIMITED HACKERS today. Kindly contact them by Email thomasunlimitedhackers@gmail.com

Thank You and God bless

Lebron John said...

Once in Amazon New World, competitive people will use the cheap New World Coins they get from IGGM to quickly promote their development.

Attached link: https://www.iggm.com/new-world-coins